Technical lighting partner for professionals Contact us
Enquiry0
Produktbild av LTECH LM-100-24-U1A2

LED Driver 24V 100W 0-10V / Push DIM IP20

CV · 24 V · 100 W · 0/1–10 V

Input voltage
120-277 V AC
Output voltage
24 V
Max. power
100 W
Control
0–10 V, Push DIM
IP rating
IP20
Dimensions
352 × 43 × 30 mm

Logga in för pris och orderförfrågan

SKU: LM-100-24-U1A2 Category:

Description

24 V constant-voltage LED driver delivering up to 100 W total output for dimmable LED strips and other compatible fixed-colour LED loads. Controlled via 0/1–10 V. A momentary push button also provides Push DIM control.

Installation and load

The manufacturer specifies resistor-current-limited LED loads, such as LED strips. Loads with built-in constant-current ICs can produce high inrush current and trigger overload protection; confirm compatibility and any special programming before ordering. Check the product label, LED load, total power and wiring diagram before installation. Provide ventilation and observe the specified ta and tc limits.

Current manufacturer manual

ModelLM-100-24-U1A2
Output typeConstant voltage (CV)
Output voltage24 V DC
Total output powerMax. 100 W
Maximum total output current4.13 A
Channel functionDimming of single-colour LED loads
Control0/1–10V /10V PWM/RX; Push DIM
NFCNot specified in the current manufacturer document
Dimming range0–100 %
Minimum dimming level0.1 %
AC supply range120–277 V AC
IP ratingIP20
Insulation classII
Ambient temperature ta-20…+50 °C
Maximum case temperature tc85 °C
Dimensions (L × W × H)352 × 43 × 30 mm
Gross weight430 g
Manufacturer warranty5 years
Nominal AC input120-277 V AC

Technical details

The details for your installation

Constant-voltage LED product for 24 V and up to 100 W, with 0–10 V, Push DIM control.

Check connections, load and mounting instructions in Ltech’s original datasheet before installation.

Open Datasheet (PDF)
352 mmLM-100-24-U1A2TOP VIEWSIDE VIEW43 mm30 mm
Dimension drawing · 352 × 43 × 30 mm · schematic

LED driver guides

Related products