Technical lighting partner for professionals Contact us
Enquiry0
Produktbild av LTECH LM-100-24-G1D2F

LED Driver 24V 100W DALI-2 IP20

CV · 24 V · 100 W · DALI-2 · NFC

Input voltage
220-240 V AC
Output voltage
24 V
Max. power
100 W
Control
DALI, DALI-2, Push DIM
DALI device type (DT)
DT6
IP rating
IP20
Dimensions
293 × 43 × 30 mm

DALI-2 control also works in DALI systems. Available functions depend on the controller.

Logga in för pris och orderförfrågan

SKU: LM-100-24-G1D2F Category:

Description

24 V constant-voltage LED driver delivering up to 100 W total output for dimmable LED strips and other compatible fixed-colour LED loads. Controlled via DALI-2. A momentary push button also provides Push DIM control.

Installation and load

The manufacturer specifies resistor-current-limited LED loads, such as LED strips. Loads with built-in constant-current ICs can produce high inrush current and trigger overload protection; confirm compatibility and any special programming before ordering. For DC input operation, evaluate the completed luminaire’s electromagnetic compatibility (EMC) as required by the manufacturer. For mounting on a wooden surface, the manufacturer specifies spacers of at least 7 mm under the fixings for heat dissipation; follow the mounting diagram. Check the product label, LED load, total power and wiring diagram before installation. Provide ventilation and observe the specified ta and tc limits.

Control and configuration

Use NFC Lighting to configure parameters. NFC programming is separate from normal lighting control.

Current manufacturer manual

ModelLM-100-24-G1D2F
Output typeConstant voltage (CV)
Output voltage24 V DC
Total output powerMax. 100 W
Maximum total output current4.17 A
Channel functionDimming of single-colour LED loads
ControlDALI-2 DT6; Push DIM; corridor DIM
NFCYes, parameter configuration
Dimming range0–100 %
Minimum dimming level0.01 %
AC supply range220–240 V AC
DC supply range220–240 V DC
Mains frequency50/60 Hz
IP ratingIP20
Insulation classII
Ambient temperature ta-20…+50 °C
Maximum case temperature tc80 °C
Dimensions (L × W × H)293 × 43 × 30 mm
Net weight300 g ± 10 g
Manufacturer warranty5 years
Nominal AC input220-240 V AC

Technical details

The details for your installation

Constant-voltage LED product for 24 V and up to 100 W, with DALI, DALI-2, Push DIM control.

Check connections, load and mounting instructions in Ltech’s original datasheet before installation.

Open Datasheet (PDF)
293 mmLM-100-24-G1D2FTOP VIEWSIDE VIEW43 mm30 mm
Dimension drawing · 293 × 43 × 30 mm · schematic

LED driver guides

Related products