Description
24 V constant-voltage LED driver delivering up to 150 W total output for tunable-white/CCT lighting. Controlled via Matter over Thread. Requires a compatible Matter hub with a Thread Border Router.
Installation and load
The two channels drive warm-white and cool-white LED loads. Combined output is limited to 150 W; size the channel loads according to the wiring diagram. The manufacturer specifies resistor-current-limited LED loads, such as LED strips. Loads with built-in constant-current ICs can produce high inrush current and trigger overload protection; confirm compatibility and any special programming before ordering. For DC input operation, evaluate the completed luminaire’s electromagnetic compatibility (EMC) as required by the manufacturer. For mounting on a wooden surface, the manufacturer specifies spacers of at least 7 mm under the fixings for heat dissipation; follow the mounting diagram. Check the product label, LED load, total power and wiring diagram before installation. Provide ventilation and observe the specified ta and tc limits.
Control and configuration
Add the device in your selected Matter platform’s app. The installation must include the hub’s Thread Border Router. NFC Lighting configures driver parameters; the configurable minimum and the factory default are different settings.
