Technical lighting partner for professionals Contact us
Enquiry0
Produktbild av LTECH LM-240-24-G2D2

LED Driver 24V 240W DALI-2 DT6/DT8 CCT IP20

CV · 24 V · 240 W · DALI-2 · CCT · NFC

Input voltage
220-240 V AC
Output voltage
24 V
Max. power
240 W
Control
DALI, DALI-2, Push DIM
DALI device type (DT)
DT6, DT8
IP rating
IP20
Dimensions
380 × 49.5 × 30 mm

DALI-2 control also works in DALI systems. Available functions depend on the controller.

Logga in för pris och orderförfrågan

SKU: LM-240-24-G2D2 Category:

Description

24 V constant-voltage LED driver delivering up to 240 W total output for tunable-white/CCT lighting. Controlled via DALI-2. A momentary push button can also provide Push DIM/CCT control.

Installation and load

The two channels drive warm-white and cool-white LED loads. Combined output is limited to 240 W; size the channel loads according to the wiring diagram. The manufacturer specifies resistor-current-limited LED loads, such as LED strips. Loads with built-in constant-current ICs can produce high inrush current and trigger overload protection; confirm compatibility and any special programming before ordering. For mounting on a wooden surface, the manufacturer specifies spacers of at least 7 mm under the fixings for heat dissipation; follow the mounting diagram. Check the product label, LED load, total power and wiring diagram before installation. Provide ventilation and observe the specified ta and tc limits.

Control and configuration

Use NFC Lighting to configure parameters. NFC programming is separate from normal lighting control.

Current manufacturer manual

ModelLM-240-24-G2D2
Output typeConstant voltage (CV)
Output voltage24 V DC
Total output powerMax. 240 W
Maximum total output current10 A
Channel function2 channels, tunable white (CCT)
ControlDALI-2 DT6/DT8; Push DIM/CCT
NFCYes, parameter configuration
Dimming range0–100 %
Minimum dimming level0.01 %
AC supply range220–240 V AC
DC supply range200–250 V DC
Mains frequency50/60 Hz
IP ratingIP20
Insulation classII
Ambient temperature ta-20…+45 °C
Maximum case temperature tc86 °C
Dimensions (L × W × H)380 × 49.5 × 30 mm
Net weight555 g ± 10 g
Manufacturer warranty5 years
Nominal AC input220-240 V AC

Technical details

The details for your installation

Constant-voltage LED product for 24 V and up to 240 W, with DALI, DALI-2, Push DIM control.

Check connections, load and mounting instructions in Ltech’s original datasheet before installation.

Open Datasheet (PDF)
380 mmLM-240-24-G2D2TOP VIEWSIDE VIEW49.5 mm30 mm
Dimension drawing · 380 × 49.5 × 30 mm · schematic

LED driver guides

Related products