Technical lighting partner for professionals Contact us
Enquiry0
Produktbild av LTECH LM-75-24-G1M2

LED Driver 24V 75W DMX / Push DIM IP20

CV · 24 V · 75 W · DMX512/RDM

Input voltage
220-240 V AC
Output voltage
24 V
Max. power
75 W
Control
DMX, Push DIM
IP rating
IP20
Dimensions
293 × 43 × 30 mm

Logga in för pris och orderförfrågan

SKU: LM-75-24-G1M2 Category:

Description

24 V constant-voltage LED driver delivering up to 75 W total output for dimmable LED strips and other compatible fixed-colour LED loads. Controlled via DMX512/RDM. A momentary push button also provides Push DIM control.

Installation and load

The manufacturer specifies resistor-current-limited LED loads, such as LED strips. Loads with built-in constant-current ICs can produce high inrush current and trigger overload protection; confirm compatibility and any special programming before ordering. Check the product label, LED load, total power and wiring diagram before installation. Provide ventilation and observe the specified ta and tc limits.

Current manufacturer manual

ModelLM-75-24-G1M2
Output typeConstant voltage (CV)
Output voltage24 V DC
Total output powerMax. 75 W
Maximum total output current3.125 A
Channel functionDimming of single-colour LED loads
ControlDMX512/RDM; Push DIM
NFCNot specified in the current manufacturer document
Dimming range0–100 %
Minimum dimming level0.1 %
AC supply range220–240 V AC
Mains frequency50/60 Hz
IP ratingIP20
Insulation classII
Ambient temperature ta-20…+50 °C
Maximum case temperature tc80 °C
Dimensions (L × W × H)293 × 43 × 30 mm
Gross weight300 g ± 10 g
Manufacturer warranty5 years
Nominal AC input220-240 V AC

Technical details

The details for your installation

Constant-voltage LED product for 24 V and up to 75 W, with DMX, Push DIM control.

Check connections, load and mounting instructions in Ltech’s original datasheet before installation.

Open Datasheet (PDF)
293 mmLM-75-24-G1M2TOP VIEWSIDE VIEW43 mm30 mm
Dimension drawing · 293 × 43 × 30 mm · schematic

LED driver guides

Related products