Technical lighting partner for professionals Contact us

LED Driver 12V 150W 0-10V IP20

CV · 12 V · 150 W · 0/1–10 V

Input voltage
220-240 V AC
Output voltage
12 V
Max. power
150 W
Control
0–10 V, Push DIM
IP rating
IP20
Dimensions
352 × 43 × 30 mm

Logga in för pris och orderförfrågan

SKU: LM-150-12-G1A2 Category:

Description

12 V constant-voltage LED driver delivering up to 150 W total output for dimmable LED strips and other compatible fixed-colour LED loads. Controlled via 0/1–10 V. A momentary push button also provides Push DIM control.

Installation and load

The manufacturer specifies resistor-current-limited LED loads, such as LED strips. Loads with built-in constant-current ICs can produce high inrush current and trigger overload protection; confirm compatibility and any special programming before ordering. Check the product label, LED load, total power and wiring diagram before installation. Provide ventilation and observe the specified ta and tc limits.

ModelLM-150-12-G1A2
Output typeConstant voltage (CV)
Output voltage12 V DC
Total output powerMax. 150 W
Maximum total output current12.5 A
Channel functionDimming of single-colour LED loads
Control0/1–10V /10V PWM/RX; Push DIM
NFCNot specified in the current manufacturer document
Dimming range0–100 %
Minimum dimming level0.1 %
AC supply range220–240 V AC
DC supply range200–280 V DC
Mains frequency50/60 Hz
IP ratingIP20
Ambient temperature ta-20…+50 °C
Maximum case temperature tc85 °C
Dimensions (L × W × H)352 × 43 × 30 mm
Gross weight430 g ± 10 g
Manufacturer warranty5 years
Nominal AC input220-240 V AC

Technical details

The details for your installation

Constant-voltage LED product for 12 V and up to 150 W, with 0–10 V, Push DIM control.

Check connections, load and mounting instructions in Ltech’s original datasheet before installation.

Open Datasheet (PDF)
352 mmLM-150-12-G1A2TOP VIEWSIDE VIEW43 mm30 mm
Dimension drawing · 352 × 43 × 30 mm · schematic

LED driver guides