Technical lighting partner for professionals Contact us
Enquiry0
Produktbild av LTECH SE-12-100-500-W2D

LED Driver CC 100-500mA 12W DALI-2 DT6/DT8 2-kanal IP20

CC · 100–500 mA · 12 W · DALI / DALI-2 · NFC Lighting, 1 mA steps · IP20

Input voltage
100-240 V AC
Output voltage
9-42 V
Output current
100–500 mA
Max. power
12 W
Control
DALI, DALI-2
DALI device type (DT)
DT6, DT8
IP rating
IP20
Dimensions
110 × 35 × 20 mm

DALI-2 control also works in DALI systems. Available functions depend on the controller.

Logga in för pris och orderförfrågan

SKU: SE-12-100-500-W2D Category:

Description

LTECH SE-12-100-500-W2D is a constant-current LED driver with an adjustable output current of 100–500 mA. Control: DALI / DALI-2. The maximum combined output is 12 W.

Set the output current with the NFC Lighting app in 1 mA steps. Disconnect power to the driver before programming, select a current suitable for the LED module and write the setting via NFC. The app configures parameters; everyday dimming uses the driver’s stated control interface.

The two outputs connect warm-white and cool-white LED loads for colour-temperature control. Size both loads together within 12 W; do not double the stated output.

NFC Lighting offers DT8 CT, DT6 CT and DT6 DIM modes. DT6 DIM supports one address/one channel, one address/two channels or two addresses/two channels. Select the mode to suit the DALI controller and connected luminaire.

Check the LED module’s rated current and voltage requirement at full brightness. The Technical specifications tab lists the voltage range at each current and calculated load power: P = I × U. The lower voltage limit describes a compatible LED load, not minimum dimming. The driver’s maximum output limit still applies where a rounded voltage row produces a slightly higher calculated value.

The current rows are selected reference points from the operating envelope, not fixed switch positions or an exhaustive manufacturer settings table.

ModelSE-12-100-500-W2D
Output typeConstant current (CC)
Output current100–500 mA
Output voltage range9–42 V DC
Maximum combined output12 W
Channels2
ControlDALI / DALI-2
DALI device typeDT6 / DT8
Current settingNFC Lighting, 1 mA steps
Input voltage100-240 V AC
Dimming range0–100%
Minimum stated dimming level0.01%
Ambient temperature ta-20–50 °C
Maximum case temperature tc90 °C
Dimensions (L × W × H)110 × 35 × 20 mm
Net weight85 ± 10 g
IP ratingIP20
Standby after off command<0.5 W
ProtectionOvertemperature, overload, short circuit
LTECH SE-12-100-500-W2D – example operating points within the manufacturer’s operating envelope · Set current / Output voltage at full brightness / Calculated power at voltage limits
Set current: 100 mAOutput voltage at full brightness: 9–42 VCalculated power at voltage limits: 0.9–4.2 W
Set current: 150 mAOutput voltage at full brightness: 9–42 VCalculated power at voltage limits: 1.35–6.3 W
Set current: 200 mAOutput voltage at full brightness: 9–42 VCalculated power at voltage limits: 1.8–8.4 W
Set current: 250 mAOutput voltage at full brightness: 9–42 VCalculated power at voltage limits: 2.25–10.5 W
Set current: 300 mAOutput voltage at full brightness: 9–40 VCalculated power at voltage limits: 2.7–12 W
Set current: 350 mAOutput voltage at full brightness: 9–34 VCalculated power at voltage limits: 3.15–11.9 W
Set current: 400 mAOutput voltage at full brightness: 9–30 VCalculated power at voltage limits: 3.6–12 W
Set current: 450 mAOutput voltage at full brightness: 9–27 VCalculated power at voltage limits: 4.05–12.15 W
Set current: 500 mAOutput voltage at full brightness: 9–24 VCalculated power at voltage limits: 4.5–12 W
NFCYes

Technical details

The details for your installation

Constant-current LED driver for 100–500 mA, up to 12 W, with DALI, DALI-2 control.

Check connections, load and mounting instructions in Ltech’s original datasheet before installation.

Open Datasheet (PDF)
110 mmSE-12-100-500-W2DTOP VIEWSIDE VIEW35 mm20 mm
Dimension drawing · 110 × 35 × 20 mm · schematic

Constant current · SE-12-100-500-W2D

Current, voltage and available power

Set the LED module current using the NFC Lighting app or LTECH NFC programmer. Available power depends on the permitted output voltage at that current: W = V × A. The rated wattage is not available at every current setting.

The table describes the LED load at full brightness, not the lowest dimming level. Power follows current × voltage; also check the driver rating and original datasheet before selecting a load.

Two-channel driver: the power limit in the table applies to both channels combined, not to each channel.

Related products