Technical lighting partner for professionals Contact us
Enquiry0
Produktbild av LTECH LU-75-500-1750-U1D2

LED Driver CC 500-1750mA 75W DALI-2 IP20

CC · 500–1750 mA · 75 W · DALI / DALI-2 / Push DIM · LT-ISET through SET PORT · IP20

Input voltage
100-277 V AC
Output voltage
10-54 V
Output current
500–1750 mA
Max. power
75 W
Control
DALI, DALI-2, Push DIM
IP rating
IP20
Dimensions
355 × 31 × 21 mm

DALI-2 control also works in DALI systems. Available functions depend on the controller.

Logga in för pris och orderförfrågan

SKU: LU-75-500-1750-U1D2 Category:

Description

LTECH LU-75-500-1750-U1D2 is a constant-current LED driver with an adjustable output current of 500–1750 mA. Control: DALI / DALI-2 / Push DIM. The maximum output is 75 W.

Program the current with the separate LT-ISET programmer through the SET PORT while the driver is disconnected from power. The factory setting is 500 mA. This model does not use NFC Lighting. Full 75 W output is available within the manufacturer’s stated 1380–1750 mA full-power range; at lower current, LED load voltage limits available power.

Input is 100–240 V AC; the manufacturer restricts 277 V AC operation to North America.

Check the LED module’s rated current and voltage requirement at full brightness. The Technical specifications tab lists the voltage range at each current and calculated load power: P = I × U. The lower voltage limit describes a compatible LED load, not minimum dimming. The driver’s maximum output limit still applies where a rounded voltage row produces a slightly higher calculated value.

The current rows are selected reference points from the operating envelope, not fixed switch positions or an exhaustive manufacturer settings table.

ModelLU-75-500-1750-U1D2
Output typeConstant current (CC)
Output current500–1750 mA
Output voltage range10–54 V DC
Maximum output75 W
Channels1
ControlDALI / DALI-2 / Push DIM
Current settingLT-ISET through SET PORT
Input voltage100–240 V AC; 277 V AC North America only
Dimming range0–100%
Minimum stated dimming level0.1%
Ambient temperature ta-20–50 °C
Maximum case temperature tc85 °C
Dimensions (L × W × H)355 × 31 × 21 mm
Gross weight330 ± 10 g
IP ratingIP20
Standby after off command<0.5 W
ProtectionOvertemperature, overload, short circuit
LTECH LU-75-500-1750-U1D2 – example operating points within the manufacturer’s operating envelope · Set current / Output voltage at full brightness / Calculated power at voltage limits
Set current: 500 mAOutput voltage at full brightness: 10–54 VCalculated power at voltage limits: 5–27 W
Set current: 750 mAOutput voltage at full brightness: 10–54 VCalculated power at voltage limits: 7.5–40.5 W
Set current: 1000 mAOutput voltage at full brightness: 10–54 VCalculated power at voltage limits: 10–54 W
Set current: 1250 mAOutput voltage at full brightness: 10–54 VCalculated power at voltage limits: 12.5–67.5 W
Set current: 1380 mAOutput voltage at full brightness: 10–54 VCalculated power at voltage limits: 13.8–74.52 W
Set current: 1500 mAOutput voltage at full brightness: 10–50 VCalculated power at voltage limits: 15–75 W
Set current: 1750 mAOutput voltage at full brightness: 10–42.8 VCalculated power at voltage limits: 17.5–74.9 W

Technical details

The details for your installation

Constant-current LED driver for 500–1750 mA, up to 75 W, with DALI, DALI-2, Push DIM control.

Check connections, load and mounting instructions in Ltech’s original datasheet before installation.

Open Datasheet (PDF)
355 mmLU-75-500-1750-U1D2TOP VIEWSIDE VIEW31 mm21 mm
Dimension drawing · 355 × 31 × 21 mm · schematic

Constant current · LU-75-500-1750-U1D2

Current, voltage and available power

Set the LED module current using LT-ISET through the SET PORT. Available power depends on the permitted output voltage at that current: W = V × A. The rated wattage is not available at every current setting.

The table describes the LED load at full brightness, not the lowest dimming level. Power follows current × voltage; also check the driver rating and original datasheet before selecting a load.

Program with LT-ISET via the SET PORT. This model does not use NFC programming.

Related products