Description
LTECH SE-8-350-700-G1D is a constant-current LED driver with an adjustable output current of 350–700 mA. Control: DALI / DALI-2 / Push DIM. The maximum output is 8.4 W.
Set the output current with the NFC Lighting app in 1 mA steps. Disconnect power to the driver before programming, select a current suitable for the LED module and write the setting via NFC. The app configures parameters; everyday dimming uses the driver’s stated control interface.
Check the LED module’s rated current and voltage requirement at full brightness. The Technical specifications tab lists the voltage range at each current and calculated load power: P = I × U. The lower voltage limit describes a compatible LED load, not minimum dimming. The driver’s maximum output limit still applies where a rounded voltage row produces a slightly higher calculated value.
The wattage in the model family is not available at every current setting. Design for a maximum of 8.4 W and the voltage range at the selected current.
The manufacturer’s table lists 8.4 W as the upper power value for all eight reference rows. Load power is also limited by the voltage at the selected current: 350 mA × 18 V gives 6.3 W. Calculated load power is therefore shown separately from the driver’s maximum output.
