Technical lighting partner for professionals Contact us
Enquiry0
Produktbild av LTECH SE-40-300-1050-W1D

LED Driver CC 300-1050mA 40W DALI-2 IP20

CC · 300–1050 mA · 40 W · DALI / DALI-2 · NFC Lighting, 1 mA steps · IP20

Input voltage
100-240 V AC
Output voltage
9-42 V
Output current
300–1050 mA
Max. power
40 W
Control
DALI, DALI-2
DALI device type (DT)
DT6
IP rating
IP20
Dimensions
142 × 40 × 23 mm

DALI-2 control also works in DALI systems. Available functions depend on the controller.

Logga in för pris och orderförfrågan

SKU: SE-40-300-1050-W1D Category:

Description

LTECH SE-40-300-1050-W1D is a constant-current LED driver with an adjustable output current of 300–1050 mA. Control: DALI / DALI-2. The maximum output is 40 W.

Set the output current with the NFC Lighting app in 1 mA steps. Disconnect power to the driver before programming, select a current suitable for the LED module and write the setting via NFC. The app configures parameters; everyday dimming uses the driver’s stated control interface.

Check the LED module’s rated current and voltage requirement at full brightness. The Technical specifications tab lists the voltage range at each current and calculated load power: P = I × U. The lower voltage limit describes a compatible LED load, not minimum dimming. The driver’s maximum output limit still applies where a rounded voltage row produces a slightly higher calculated value.

ModelSE-40-300-1050-W1D
Output typeConstant current (CC)
Output current300–1050 mA
Output voltage range9–42 V DC
Maximum output40 W
Channels1
ControlDALI / DALI-2
DALI device typeDT6
Current settingNFC Lighting, 1 mA steps
Input voltage100-240 V AC
Dimming range0–100%
Minimum stated dimming level0.01%
Ambient temperature ta-20–45 °C
Maximum case temperature tc90 °C
Dimensions (L × W × H)142 × 40 × 23 mm
Net weight170 ± 10 g
IP ratingIP20
Standby after off command<0.5 W
ProtectionOvertemperature, overload, short circuit
LTECH SE-40-300-1050-W1D – documented settings and power from stated voltage · Set current / Output voltage at full brightness / Calculated power at voltage limits
Set current: 300 mAOutput voltage at full brightness: 9–42 VCalculated power at voltage limits: 2.7–12.6 W
Set current: 350 mAOutput voltage at full brightness: 9–42 VCalculated power at voltage limits: 3.15–14.7 W
Set current: 400 mAOutput voltage at full brightness: 9–42 VCalculated power at voltage limits: 3.6–16.8 W
Set current: 450 mAOutput voltage at full brightness: 9–42 VCalculated power at voltage limits: 4.05–18.9 W
Set current: 500 mAOutput voltage at full brightness: 9–42 VCalculated power at voltage limits: 4.5–21 W
Set current: 550 mAOutput voltage at full brightness: 9–42 VCalculated power at voltage limits: 4.95–23.1 W
Set current: 600 mAOutput voltage at full brightness: 9–42 VCalculated power at voltage limits: 5.4–25.2 W
Set current: 650 mAOutput voltage at full brightness: 9–42 VCalculated power at voltage limits: 5.85–27.3 W
Set current: 700 mAOutput voltage at full brightness: 9–42 VCalculated power at voltage limits: 6.3–29.4 W
Set current: 750 mAOutput voltage at full brightness: 9–42 VCalculated power at voltage limits: 6.75–31.5 W
Set current: 800 mAOutput voltage at full brightness: 9–42 VCalculated power at voltage limits: 7.2–33.6 W
Set current: 850 mAOutput voltage at full brightness: 9–42 VCalculated power at voltage limits: 7.65–35.7 W
Set current: 900 mAOutput voltage at full brightness: 9–42 VCalculated power at voltage limits: 8.1–37.8 W
Set current: 950 mAOutput voltage at full brightness: 9–42 VCalculated power at voltage limits: 8.55–39.9 W
Set current: 1000 mAOutput voltage at full brightness: 9–40 VCalculated power at voltage limits: 9–40 W
Set current: 1050 mAOutput voltage at full brightness: 9–38 VCalculated power at voltage limits: 9.45–39.9 W
NFCYes

Technical details

The details for your installation

Constant-current LED driver for 300–1050 mA, up to 40 W, with DALI, DALI-2 control.

Check connections, load and mounting instructions in Ltech’s original datasheet before installation.

Open Datasheet (PDF)
142 mmSE-40-300-1050-W1DTOP VIEWSIDE VIEW40 mm23 mm
Dimension drawing · 142 × 40 × 23 mm · schematic

Constant current · SE-40-300-1050-W1D

Current, voltage and available power

Set the LED module current using the NFC Lighting app or LTECH NFC programmer. Available power depends on the permitted output voltage at that current: W = V × A. The rated wattage is not available at every current setting.

The table describes the LED load at full brightness, not the lowest dimming level. Power follows current × voltage; also check the driver rating and original datasheet before selecting a load.

Related products